Thickness: 1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm 

 Length: (coil) 20m ~ 30m 

 Width: 1220mm, 1560mm, 1820mm, 2050mm 

 Color: Clear, transparent blue, transparent green, brown, white 

 Performance PC Nai Liban 
 (A) of the mechanical properties 
 1, the impact strength: PC Nai Liban excellent impact resistance, it is 250 times higher than conventional glass, 30 times higher than the acrylic sheet. 
 Pc impact strength of polycarbonate panels like "transparent plate," said. 
 2, good tensile strength, PC polycarbonate panels heat resistance, even at 120 ℃, the tensile strength is still up to 350kgf/cm2. 
 3, bending strength: PC Solid sheet bending is good, even if the bending angle of 90 °, still broken. 
 4, anti-fatigue and creep resistance: PC Nai Liban creep resistance in the thermoplastic plastic is best. Creep even at high temperatures is still very small. 
 (B) of the thermal properties 
 1, the melting temperature type: PC solid sheet-shaped melting temperature of 135 ℃, its continuous use temperature of 120 ℃. 
 2, the linear expansion coefficient: linear expansion coefficient of 7 × 10-5cm/cm / ℃ are smaller in plastics. 
 3, the brittle temperature: PC Nai Liban brittle transition temperature of -40 ℃, the minimum continuous use temperature of -30 ℃, the plastic is generally not comparable. 
 4, Combustion: PC solid sheet of plastic is one of self-extinguishing flame retardant, and its high-temperature heating will not produce toxic gases. 
 5, thermal conductivity: PC solid sheet of the thermal conductivity of plastic little difference in general, is the glass 1 / 4, Fe 1 / 300, 
 Aluminum 1 / 1000, copper 1 / 2000, is one of insulation materials with excellent properties. 
 (C) of the optical properties 
 1, the light transmission rate: PC solid sheet of light transmission rate of 85% or more of glass quite. 
 2, Weather resistance: the general long-term exposure to outdoor PC endurance board, by ultraviolet radiation can lead to yellowing and surface degradation. PC solid sheet surface with this 

 Layer anti-UV layer, even if the long-term exposure to outdoor, optical and mechanical properties did not change significantly. 
 (D) the noise performance 
 PC Nai Liban sound insulation than glass high 3-4DB, is the material of choice for highway noise barriers. This PC Nai Liban has been light rail project in Tianjin, 

 Wuhan Light Rail project and the country a lot of noise barriers on the use of urban roads. 
 (E) Chemical resistance 
 Polycarbonate at room temperature on the weak acid, weak base, good performance and resistance to alcohol, but strong acid, benzene, chlorinated hydrocarbons and esters of resistance to the 

 Somewhat less apt to dissolve, the phenomenon of swelling or decomposition. Because of its chemical resistance and the temperature, the size of the internal residual stress and long exposure time 

 For short, it should pay particular attention before use. (See PC Nai Liban incompatible chemicals and instructions) 
 (F) light 
 Under the same thickness and area, PC solid sheet of glass is only half the weight, so you can save a lot of the difficulty of handling and shipping and construction.